3. Find out of Problems
1.Selvedges
2.Width Variation
3.Crease Mark
4.Elephant
4. Selvedges
Causes:-
1. Auto Selvedges Guides not proper working
2. Near of Selvedges if any hole
3. Pin more keep
4. Without sewing only knots use
5. Pin out some area
6. Solution:
1. Auto Selvedges need to be properly work
2. All joint properly sewing
3. Manually Adjust selvedges
4. Pinning adjust if out from pin
5. Two person work in operation side
Selvedges
8. Width Variation
Causes:
1. Stenter M/c setup change within one Roll
2. Pin selvedge controller auto not proper work
3. If not proper stitch before stenter m/c
10. Solution:
1. Same setup width Full batch Finish
2. selvedge controller should work auto
3. proper stitch each rolls
4. Stenter m/c running time must be actively work of
Operators
Width Variation
12. Causes:
1. From Padder (If proper not open uncurler Roller)
2. Pin out from stenter m/c
3. If not use leading cloth in time in stenter m/c rather than ropes
4. From Dyeing (If ropes stage dyeing)
5. If edges not proper stitch and knots pass from corino
Crease Mark
14. Solution:
1. Slitting, Stenter & Compacting starting time
reject fabrics Stitch.
2. Operator all time actively follow up
3. Every joint straight sewing.
4. Any Hole Sewing
Crease Mark
18. Solution-
1. Before compactor m/c run then
everything checks.
2. Up to mark feed the over feed.
3. Taplon/ Glass fiber properly set.
Elephant Skin how to solved