Magic Flow: The equipment and solution for Wood Polyester Coating
- 1. © 2015 Finishing Brands - A Carlisle Company All rights reserved. 04/15
© 2015 Finishing Brands - A Carlisle Company All rights reserved. 04/15
Magic-Flow 2
2K, 3K and 4K Electronic Mixing
Insert Footer 1
- 2. © 2015 Finishing Brands - A Carlisle Company All rights reserved. 04/15
Introduction
Magic-Flow 2 is a versatile and flexible
mixing solution designed to accommodate
many low pressure or high pressure
applications.
It supports a range of optional,
functionality-enhancing modules to
provide 2, 3 or 4K component mixing up
to a maximum of 29 colours with up to 4
spray guns.
Turn complicated and time consuming
mixing operations into highly precise,
‘select and spray’ operations.
Insert Footer 2
- 3. © 2015 Finishing Brands - A Carlisle Company All rights reserved. 04/15
Magic-Flow 2 Markets and
Applications
APPLICATIONS
Off Road and Earth Moving Vehicles
Aerospace / Aviation
Fork Lift, Trucks and Trailer
General Industry
Agricultural Machinery
Plastic Components
Transportation
Plus Many Others:
SUITABLE FOR MATERIALS
Solvent or Waterborne Coatings
Polyurethanes / Acrylics
Isocyanates / Epoxies
Acid Catalysed Materials
3
- 4. © 2015 Finishing Brands - A Carlisle Company All rights reserved. 04/15
MagicFlow 2 Features
Insert Footer 4
• 7“ display
• 800 x 480 pixel
• TFT 16bit color
• RS232
• Ethernet
• WLAN
• Stand: included
• LED light tower: included
• Acoustic alarm: included
• PC software: launched 2015
3 air regulators for
• solenoid valves
• atomizing air
• paint pressure
- 5. © 2015 Finishing Brands - A Carlisle Company All rights reserved. 04/15
MagicFlow 2 Features
Insert Footer 5
• 5 Basic units for easier ordering:
(1) - 2 gear flow meters
(2) - 1 Coriolis (4mm) + 1 gear flow meter
(3) - 1 Coriolis (6mm) + 1 gear flow meter
(4) - 2 Coriolis flow meters (4mm + 4mm)
(5) - 2 Coriolis flow meters (6mm + 4mm)
•4K standard software loaded
•32 valves
•50 Recipes
•Stand not behind, but next to the control boxes; more stable
centre of gravity
•Tower Alarm lights fitted as standard
•Aluminium stand fitted as standard
•19” draw mounting version option
(as per Ransburg Cascade guns)
•MagicFlow hardener injection method used
•Coriolis meter compatibility
•ATEX or Non-ATEX
•Simple remote panel or reed switch controlled optional extra
•LP & HP versions, both same price
- 6. © 2015 Finishing Brands - A Carlisle Company All rights reserved. 04/15
MagicFlow 2 Data
Insert Footer 6
Downloadable Information:
• Recipe coating Consumption C1...30 (only A+B
together)
• Consumption for each component or valve 1…32
• Recipe 1…30 Max Flow
• “Gun closed" time in mixing mode for each recipe
• “Gun open" time in mixing mode for each recipe
• Status of the system (parallel to robot com.
module)
• Mixing ratio of the current recipe (while spraying) or
the last active recipe (after stopping)
• Type of alarm (only during alarm event)
• Current recipe (only while mixing)
- 7. © 2015 Finishing Brands - A Carlisle Company All rights reserved. 04/15
Inside MagicFlow 2
Insert Footer 7
Power
Supply
Air
Regulators
Air Flow
Switch
PLC
‘Brain’
‘A’ Side
‘B’ Side
CCV Valves
Gearflow
Meters
Static
Mixer
Electrical Control Cabinet
Fluid Panel (built to specification)
- 8. © 2015 Finishing Brands - A Carlisle Company All rights reserved. 04/15
MagicFlow 2 Specifications
Technical Specifications
Optimal Working Air Pressure 6 – 8 bar (87 – 116psi)
Max Inlet Fluid Pressure Low/High 40bar (580psi) / 250 bar (3626psi)
No. of Recipes 50
Flushing Programs 10 x 20 Steps (Actions)
Flow Rate 50 – 2000cc/min
Operating Temperature Range 10 - 70°C (50-158°F)
Material Valves 32 max e.g. 29 Colours, 2 Solvents, 1 Catalyst
Viscosity Range of Fluid 20-100 cPs
Mixing Ratio Range 0.1:1 – 100:1
Mixing Accuracy +1% (after calibration)
Wetted Parts Stainless Steel, PTFE, Polyamide
Options Multi-Gun, ATEX, Coriolis Mass Flow Meters,
Robot Communications, Agitator Control, Gun
Flushbox, Remote Control, Printer Port,
Atomising Air Switch Off